Siemens Pointek CLS200 Flexible Cable Probe Capacitance Point Level Switch
$500+ Orders on Lesman.com Ship Free via UPS Ground
High sensitivity inverse frequency shift capacitance level switch with flexible cable probe for point level and material detection in liquids, solids, slurries, interfaces, and foam. Standard cable insertion lengths of 9.84 or 19.68 feet (3 or 6 meters), optional custom lengths from 19.7" to 98.42 feet (0.5 to 30 meters). NEMA 4/IP65 enclosure. 1 SPDT Form C relay output and solid state switch output. For process temperatures to 185° or 257°F (85° or 125°C) and process pressures to 150 PSIG. For media with minimum dielectric constant 1.5.
Siemens Pointek CLS200 is a capacitance level switch with an integral flexible cable extension sensor for detection of liquids, solids, slurries, foam and interfaces, and works even when there's buildup on the probe. The cable version is designed for top mounting in tall tanks. The cable suspends vertically so it reaches into the process at your desired high or low detection and alarm level.
The Pointek CLS200 cable version has three under-the-cover LED indicators (power, sensor, output status) with basic relay and solid-state switch alarms outputs. The CLS200 is rated for use in process temperatures to 185°F (85°C). Add a thermal isolator for process temperatures to 257°F (125°C). Cable versions are rated for process pressure to 150 PSIG.
The CLS200 switch detects level by responding to any change in capacitance material with a dielectric constant of 1.5 or more, by detecting a change in its oscillating frequency. It can be set to detect before contact or on contact with the probe. The CLS200 operates independently of the tank wall or pipe so it does not require an external reference electrode for level detection in a non-conductive vessel such as concrete or plastic.
- Key applications include liquids, slurries, powders, granules, pressurized applications, and hazardous areas
- Inverse frequency shift capacitance technology for high sensitivity measurements
- Standard cable insertion lengths of 9.84 or 19.68 feet (3 or 6 meters), with optional cable lengths from 19.7" to 98.42 feet (0.5 to 30 meters)
- Good for high/low point level monitoring in tanks with process temperatures to 257° F (125° C)
- Form C SPDT relay and solid state switch alarm outputs
- Three LED indicators under the lid for sensor status, output status, and power
- Configure using potentiometers for trip point and delay, and dip switches for alarm output modes
- Available with NEMA4/IP65 epoxy-coated aluminum enclosure with gasket and optional 316L stainless steel thermal isolator
- Power supply: 12 - 250 V AC/DC, max. 2 W
- Choice of 3/4" to 1/2" NPT threaded or 1" to 4" ASME flanged process connection
- FEP jacketed cable with PPS or PVDF probe body, FMK or FFKM and PTFE wetted seals
- CE, CSA, FM, ATEX approvals available
Model Selection Guide
Use this table to find the right model for your application. Need a custom cable length? Don't see the option you need? Call a Lesman sales specialist at 800-953-7626.
Make one choice from each table section. A complete catalog number will look like this: 7ML5631- _ _ _ _ _ - _ _ _ _.
| Description | Catalog Number | |
|---|---|---|
| CLS200 Capacitance Point Level Detection Switch, Standard Cable Version | 7ML5631- | |
| 316L Stainless Steel Process Connection Size/Style |
3/4" NPT Threaded 1" NPT Threaded 1.25" NPT Threaded 1.5" NPT Threaded 1" ASME 150# Welded Flange 1.5" ASME 150# Welded Flange 2" ASME 150# Welded Flange 3" ASME 150# Welded Flange 4" ASME 150# Welded Flange |
0A _ _ _- 0B _ _ _- 0C _ _ _- 0D _ _ _- 5A _ _ _- 5D _ _ _- 5G _ _ _- 5K _ _ _- 5N _ _ _- |
| Standard Cable Insertion Length |
Extended Cable 9.84 Feet (3 Meters) Extended Cable 19.68 Feet (6 Meters) |
_ _ A _ _- _ _ B _ _- |
| Thermal Isolator/ Electronics |
No Thermal Isolator Thermal Isolator (For Process Temps > 185°F) Remote-Mount Electronics, 2M Cable, Mounting Bracket Remote-Mount Electronics, 5M Cable, Mounting Bracket |
_ _ _ 0 _- _ _ _ 1 _- _ _ _ 2 _- _ _ _ 3 _- |
| Wetted Seals | FKM and PTFE FFKM and PTFE (For Process Temperatures > -4° F) |
_ _ _ _ 0- _ _ _ _ 1- |
| Probe Material | FEP Jacketed Cable with PPS Probe Body FEP Jacketed Cable with PVDF Probe Body |
0 _ _ _ 1 _ _ _ |
| Approvals | CSA/FM/CE General Service CSA/FM Dust-Ignition Proof, Intrinsically Safe Probe CSA/FM Explosion Proof, Intrinsically Safe Probe |
_ H _ _ _ F _ _ _ G _ _ |
| Enclosure | IP65 Rated Aluminum Epoxy-Coated Enclosure with Two 1/2" NPT Inlets IP68 Rated Aluminum Epoxy-Coated Enclosure with Two 1/2" NPT Inlets |
_ _ A0 _ _ C0 |
For CLS200 standard compact or extended rod, rod with sanitary process connection, or sliding coupling with threaded process connection or CLS200 digital models, call Lesman.
| Point or Continuous Level | Point |
|---|---|
| Level Media | Liquid, Slurry, Interface, Dry Solid |
| Level Technology | Capacitance |
| Measuring Range | 9.84 or 19.68 Feet (3 or 6M) Standard Insertion, Custom Cable Lengths from 19.7" to 98.42 Feet (0.5 to 30 Meters) |
| Wetted Materials | PPS or PVDF Probe, FKM or FFKM O-Ring Seal, FEP cable |
To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.
Results
| Please complete your model selections. |