Pyromation Fixed Sheath Single RTD Assembly
Fixed sheath RTDs are used in temperature applications where the sensor is not going into a well. Typically used to measure air temperatures in ducts, ovens or refrigeration or liquid temperatures in tanks.
Allow 2-3 weeks for delivery on made-to-order temperature sensors. If you need your RTD faster, please call for expedited delivery options.
A resistance temperature detector works by tracking the linear change in electrical resistance of a pure metal — like nickel, copper, or platinum — that's caused by a change in temperature. An RTD element consists of a length of fine coiled wire wrapped around a ceramic or glass core. It is fragile, and usually protected by a sheathed probe. Since platinum has a wide temperature range, and produces highly accurate and stable measurements, it's the most common RTD material.
- Provided with head mounting fittings that are welded or brazed to the sheath for direct immersion into a process
- Fixed sheath RTDs built to meet your exact requirements
- 100Ω platinum RTD element with 0.00385Ω temperature coefficient to meet IEC 60751 and ASTM E1137 standards
- Good for process temperatures to -328° to 392° F
- For lengths longer than 12" or dual element RTDs, call Lesman.
To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.
Results
| Please complete your model selections. |