Honeywell SmartLine STA800 Smart Absolute Pressure Transmitter (Accuracy 0.025% Span)
$500+ Orders on Lesman.com Ship Free via UPS Ground
Dual head or inline absolute pressure smart transmitter, mmHgA and PSIA ranges, accuracy ±0.025% span, integral and remote configuration available, FM, CSA, ATEX approvals, SIL 2/3 certified.
Honeywell SmartLine STA800 absolute pressure smart transmitters can help you reduce project costs, cut startup and commissioning time, lower total maintenance costs, reduce repair time, enhance safety, lower operating costs, reduce unplanned downtime, and improve product quality.
SmartLine STA800 transmitters are designed to replace older ST3000 Series 100 transmitter models. To replace or upgrade an ST3000 Series 900 model, see the new Honeywell STA700.
- Rangeability and turndown of up to 400:1
- Response times as fast as 80 ms (the fastest on today's market)
- Reference accuracy to 0.0375% span standard (0.025% span optional), and a total probable error as good as 0.12%
- Transmitter stability up to 0.01% span per year for 10 years
- Built-in static pressure and temperature compensation
- External zero, span, and configuration capabilities
- Polarity-insensitive electrical connections
- Plugged impulse line detection option
- Dual or triple calibration option
- Comprehensive onboard diagnostics
- Full compliance to SIL2 and SIL3 requirements standard
- Advanced graphic LCD: Eight configurable screens for process variables, bargraphs, and trends
- Modular design makes it easy to change communication modules, digital displays, and replace hardware or meter body — without buying a new unit!
Model Selection Guide
Use this table to find the right model for your application. Don't see the option you need? Call a Lesman sales specialist at 800-953-7626.
Make on selection from each table section below.
A finished catalog number looks like this: STA7_ _ - _ _ _ _ _ _ - _ - _ - _ _ _ - _ _ _ - _ - _ _ _ _ - _ _ - 0000
| Description | Catalog Number | Availability | ||
|---|---|---|---|---|
| Absolute Dual Head |
0 to 780" mm HgA (50" mm HgA min. span) 0 to 500 PSIA (5 PSIA min. span) |
STA822- STA840- |
↓ ↓ |
|
| Absolute In-Line |
0 to 780" mm HgA (50" mm HgA min. span) 0 to 500 PSIA (5 PSIA min. span) 0 to 3000 PSIA (30 PSIA min. span) |
STA82L- STA84L- STA87L |
↓ ↓ ↓ |
|
| Meter Body |
Plated CS Head, 316L SS Diaphragm 316 SS Head, 316L SS Diaphragm |
A _ _ _ _ _ _ - E _ _ _ _ _ _ - |
● ● |
● |
| Fill Fluid | Silicone Oil (DC 200) Flourinated Oil CTFE |
_ 1 _ _ _ _ _ - _ 2 _ _ _ _ _ - |
● ● |
● ● |
| Process Connections |
1/2" NPT Female DIN 19213 (1/4" NPT Female) |
_ _ G _ _ _ - _ _ D _ _ _ - |
● ● |
● ● |
| Bolt/Nut Materials |
None Carbon Steel 316 SS |
_ _ _ 0 _ _ _ - _ _ _ C _ _ _ - _ _ _ S _ _ _ - |
● ● |
● |
| Head Type/Vent/ Drain Position |
None Single Ended Single Ended, Side Drain and Vent Single Ended, Side Drain, Center SS Vent Dual Ended, End Drain, and Vent Dual Ended, End Drain, Center SS Vent Dual Ended |
_ _ _ _ 0 _ _ - _ _ _ _ 1 _ _ - _ _ _ _ 2 _ _ - _ _ _ _ 3 _ _ - _ _ _ _ 4 _ _ - _ _ _ _ 5 _ _ - _ _ _ _ 6 _ _ - |
● ● ● ● ● ● |
● |
| Gasket | None Teflon® or PTFE (Glass Filled) Viton® Graphite |
_ _ _ _ _ 0 - _ _ _ _ _ A - _ _ _ _ _ B - _ _ _ _ _ C - |
● ● ● |
● |
| Head/Connection Orientation |
High Side Left, Low Side Right, Standard Orientation Low Side Left, High Side Right, Reverse Orientation High Side Left, Low Side Right, 90° Head Rotation |
1 - 2 - 3 - |
● ● ● |
● |
| Approvals | No Approvals Required FM Approved CSA Approved ATEX Approved |
0 - A - B - C - |
● ● ● ● |
● ● ● ● |
| Electronic Housing | 1/2" NPT Aluminum 1/2" NPT Aluminum with Lightning Protection |
A _ _ - C _ _ - |
● ● |
● ● |
| Outputs | 4-20mA DC and HART® 4-20mA DC and Honeywell DE |
_ H _ - _ D _ - |
● ● |
● ● |
| Indicator and Interface |
No Indicator or Buttons No indicator, External Zero/Span Buttons Basic Indicator Basic Indicator, External Zero/Span/Config. Buttons Standard Indicator, Internal Zero/Span Buttons |
_ _ 0 - _ _ A - _ _ B - _ _ C - _ _ S - |
● ● ● ● u |
● ● ● ● u |
| Failsafe/ Write Protect |
Fail Mode High Fail Mode Low Fail Mode High, Write Protect Enabled Fail Mode Low, Write Protect Enabled |
11S - A 12S - A 13S - A 14S - A |
● ● ● ● |
● ● ● ● |
| Mounting Bracket | None Angle Bracket, Carbon Steel Angle Bracket, 304SS Flat Bracket, Carbon Steel Flat Bracket, 304SS |
0 _ _ _ 1 _ _ _ 2 _ _ _ 5 _ _ _ 6 _ _ _ |
● ● ● ● ● |
● ● ● ● ● |
| Tagging | None One Wired SS Tag (4 lines x 26 char/line) Two Wired SS Tag (4 lines x 26 char/line) |
_ 0 _ _ _ 1 _ _ _ 2 _ _ |
● ● ● |
● ● ● |
| Conduit Plugs/ Adapters |
None 1/2" NPTM to 3/4" NPTF 316 SS Conduit Adapter 1/2" NPT 316 SS Certified Conduit Plug Minifast® 4 Pin (1/2" NPT)(not for X-Proof use) |
_ _ A0 _ _ A2 _ _ A6 _ _ A8 |
● ● ● ● |
● ● ● ● |
| Certificates | Calibration Test & Cert of Conformance (F3399) Certificate of Origin (F0195) FMEDA (SIL 2/3_ Certification (FC33337) |
F1 F5 FE |
● ● j |
● ● j |
Restrictions
j Available only with HART® digital output; Requires write protection enabled
u Requires HART communications.
| HART | Yes |
|---|---|
| SIL-Rated | Yes |
To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.
Results
| Please complete your model selections. |